Next unscrew the shaft cylinder portion of the stopper the section that fits in the drain opening. Put a bucket under the drain just in case there is any dripping water.
The pivot nut is threaded onto a short stub on the.
Bathroom sink stopper removal. Step by step guide on how to remove a bathroom sink stopper step 1. This video will show you how to remove and. Remove a sink pop up drain with help from a master plumber in this fre.
The design of the stopper often catches the gunk that goes down the drain. How to remove a bathroom sink stopper for cleaning step 1. Replace the whole stopper if the plastic eye on the other end where the lever fits is broken.
Now the stopper is free and can be removed from the sink. Undo the clamp that connects the pivot rod and extension bar. Place the flashlight in a corner of the cabinet facing the bottom side of the sink so you can see what you are.
To clean the stopper you must disconnect it from the sink and pull it from the drain. Remove items out from under the sink before starting this project. Remove items from under the sink.
Try removing the stopper by hand. Go ahead and clean this with a little soapy water and a brush. A sink pop up drain can be removed from its location at the bottom of a bathroom sink.
Normally all this requires is tinkering around with a few of the parts underneath the sink. Beneath the sink you ll find a vertical metal bar with. On some types you may need to remove this cylinder with a screwdriver.
To get a good idea of the situation you should ideally just remove the pop up stopper and go from there. Some stoppers can be removed by hand without the need for any special tools or. If you can t pull the stopper out you will need to go underneath the sink.
The pop up stopper mechanism can become dislodged over time causing it to sit crookedly inside the sink drain. This portion usually has a post that is threaded into an opening in the bottom of the drain fitting. Removing the stopper lift handle and connectors 1.
Lie on your back with your head toward the. Unscrew shaft cylinder portion. When your bathroom sink does not drain well quite often it s because your pop up stopper is plugged with debris.
Unscrew the pivot nut and pull it out with the pivot rod. Fix the stopper back in the drain and then return under the sink and push the lever to the cap. Replace it if it is used.
Remove the lid from the drain and inspect the washing machine. Unscrew the grey nut on the backside of the drain and pull this out you might need a wrench if hand strength isn t enough. Look beneath the sink and find the.